Quick start guide
11 En
INTRODUCTION
English
What do you want to do with this unit?
Using various input sources
• Basic operations of this unit ☞ P. 41
• Enjoying FM/AM radio programs ☞ P. 53
• Enjoying XM Satellite Radio programs ☞ P. 56
• Using your iPod with this unit ☞ P. 62
• Enjoying the contents stored on your PC ☞ P. 64
• Enjoying Internet radio programs and Podcasts
☞ P. 67
• Using USB devices with this unit ☞ P. 68
Using various sound features
• Using various sound field programs ☞ P. 45
• Using the Pure Direct mode for high fidelity sound
☞ P. 51
• Adjusting the tonal quality of the speakers
☞ P. 51
• Customizing the sound field programs ☞ P. 74
Adjusting the parameters of this unit
• Automatically optimizing the speaker parameters for
your listening room (Auto Setup) ☞ P. 37
• Setting the remote control ☞ P. 105
Additional features
• Displaying the current input source signal
information in the GUI ☞ P. 98
• Saving and recalling the system settings of this unit
(System Memory) ☞ P. 100
• Using headphones ☞ P. 42
• Using this unit in multiple rooms simultaneously
(multi-zone configuration) ☞ P. 117
• Automatically turning off this unit ☞ P. 43
Manually adjusting various parameters
of this unit
• Setting the language of the GUI menu ☞ P. 99
• Assigning the input/output jacks of this unit
☞ P. 82
• Setting the parameters for each input source
☞ P. 81
• Setting the parameters related to the volume level
☞ P. 84
• Adjusting the tonal quality of each channel manually
by using the parametric equalizer ☞ P. 85
• Adjusting the audio and video synchronization
☞ P. 87
• Muting the selected speaker channel ☞ P. 88
• Setting the parameters related to the video signals
☞ P. 89
• Setting the basic speaker configuration ☞ P. 91
• Setting the network parameters ☞ P. 94
• Setting the parameters of the multi-zone feature
☞ P. 96
• Protecting the various settings ☞ P. 98
Adjusting the advanced parameters
• Setting the speaker impedance of the connected
speakers ☞ P. 122
• Setting the language of the GUI menu ☞ P. 126
• Setting the video format of the connected video
monitor ☞ P. 126
• Setting the parameters of this unit to default values
☞ P. 137
