E-31
English
Adjusting the graphic equalizer
for your desired sound taste
The 3 band graphic equalizer allows you to adjust the level
for each frequency band.
* Make adjustment by monitoring the equalizer level
indicators on the display.
1 Play back a source. (For source playback, refer to pages
18 to 29.)
2 Press the equalizer control or button once or
more to select the frequency band to which you will adjust
the level.
* The selected frequency band is shown on the display.
* The scale bar of the selected frequency band on the
graphic equalizer level indicators will flash.
3 Press the equalizer control or button once or more
to adjust the level.
* If a preset graphic equalizer mode is selected, its name
goes off from the preset equalizer mode indicator
(MUSIC) by this operation.
4 In the same way, make adjustment for other frequency
bands.
Note
When a karaoke mode is selected, the equalizer cannot be
adjusted.
Turning the equalizer to “flat” (the
state with no equalization applied)
By one of the following methods, the settings of preset
graphic equalizer mode (MUSIC) and sound field program
(PROGRAM) are turned off and the equalizer pattern is
turned to “flat”.
• Press the FLAT button on the remote control transmitter.
• Press the MUSIC button and the PROGRAM button on the
front panel at the same time.
USING GRAPHIC EQUALIZER
