Direct printing (PictBridge)
123
Printing pictures
8
Use the USB cable provided to connect the camera to a PictBridge-compatible printer.
1 Turn the printer on and plug the
printer end of the USB cable into
the printer’s USB port.
• For details of how to turn the printer on
and the position of the USB port, refer to
the printer’s instruction manual.
2 Plug the USB cable into the
camera’s multi-connector.
• The monitor turns on and the selection
screen for the USB connection is
displayed.
3 Select [PRINT] and press e.
• “ONE MOMENT” is displayed and the
camera and printer are connected. The
[PRINT MODE SELECT] screen is
displayed on the monitor. Select the
print settings on the camera’s monitor.
gGo to “Printing pictures” (P.124)
Connecting the camera to a printer
Note
• When the [USB] mode is set to [PC], the [PRINT MODE SELECT] screen is not
displayed. Disconnect the USB cable, and repeat the procedure from Step 1.
Mode dial
Multi-connector
Connector
cover
USB
P C
PRINT
EXIT
SELECT
GO
OK
