A SERVICE OF

logo

16
FIXED IP ADDRESS SETTING
3
3-1 Connecting to the PC
[Procedure]
q Connect the AP-12 and the PC with the supplied crossover cable.
Use the supplied patch cable (3 m: 9.8 ft) when connecting the AP-12 and the
PC via a HUB.
NOTE: DISCONNECT THE PC FROM THE EXISTING LAN.
When the PC is connected to the existing LAN, the AP-12 searches the DHCP
server and uses the IP address obtained from the server according to the
default setting.
w Connect the supplied AC adapter to the AP-12 and an AC outlet.
The Power indicator lights.
The wireless LAN indicator flashes.
e Start up the PC.
The wired LAN indicator on the top panel lights.
Check the Ethernet cable if the wired LAN indicator does not light.
AP-12
R
AC adapter
(supplied)
Ferrite core (supplied)
Ferrite core (supplied)
AC outlet
Ethernet cross
cable (supplied)
Ethernet port
DC jack
AP-12_USA 02.7.26 9:32 AM Page 16 (1,1)