General Attributes Always Required
The following general attributes are the default settings for the diagnostics. Be sure
your terminal is set to these attributes.
Note: These attributes should be set before the diagnostics are loaded.
Refer to the following table.
General
Setup
Attributes
3151
/11/31/41
Settings
3151
/51/61
Settings
3161/3164
Settings
Description
Machine mode 3151 3151 PC 3161
or
3164
The diagnostics are set to
emulate use of the 3161
ASCII Display Terminal. If
your terminal can emulate a
5085, 3161 or 3164 terminal,
use the following attribute
settings. Otherwise, refer to
your operator's manual,
compare the following
attribute descriptions with
those of your terminal, and
set your attributes
accordingly.
Generated
Code Set
ASCII
Screen Normal Normal Uses the EIA-232 interface
protocol.
Row
and
filemn
24 x 80 24 x 80 Uses the EIA-232 interface
protocol.
Scroll Jump Jump Jump When the last character on
the bottom line is entered,
the screen moves down one
line.
5-4 7043 43P Series User's Guide
