Configuring, Modifying, and Monitoring the Unit
40
Example
SYS_console> set-lt-age run 400
Aging Period update – OK
SYS_console>
get-lt-entry
The get-lt-entry command displays the entry at index in the Switching Database.
get-lt-entry <index>
The index value is the entry number in decimal, between 1 and 12288.
Example
SYS_console>get-lt-entry 1
Entry ---- MAC Address ---- LOCK DPORT SELF Vid T
=================================================================
1 00-20-1a-00-8c-3f + -NONE- + 0000 -
SYS_console>
• Entry – Signifies the index in the Switching Database Table.
• MAC Address – contained in an entry or given as a parameter is printed as a 6-byte
hexadecimal sequence separated by the “-” sign. For example:
00-20-1A-00-01-29
• LOCK – If on (denoted as a +), the entry is not deleted by the switch aging process (static
entry). If off (denoted as a -), this is a dynamic entry that may be automatically deleted by
the switch aging process if the MAC address is not active during the aging time period.
• DPORT – The destination port to which frames with the stated address are forwarded.
• SELF (not user configurable) – If on (denoted as a +), the entry is a system address. These
addresses are the switch’s individual and group addresses, as well as other addresses added by
the management system. If off (denoted as a -), the entry contains the MAC address of a station
connected to the switch.
• VID – The VLAN Identifier (tag) (appears only when features are enabled).
• T – Tag flag (appears only when features are enabled).
get-lt-16
The get-lt-16 command displays 16 learning table entries starting at index, or * to continue
from the last displayed index. The format of the display is similar to the previous command
format. If the end of the Learning table is reached, the
*
parameter starts the list over from
the beginning.
get-lt-16 {<index>|*}
