Attaching an External Monitor
a)
Click on Start.
b)
Move the cursor to Settings and Control Panel; and then click
on Control Panel.
c)
Double-click on Display.
d)
Select the Settings tab.
e)
Click on the Advanced... button.
f)
Click on the Monitor tab.
g)
Click on the Change... button.
The “Update Device Driver Wizard” window appears. Follow the
instructions on the screen to select your monitor type from the
monitor list, and click on a new resolution, color depth and
refresh rate.
7
Restart the computer to make the changes effective.
Do not disconnect the external monitor while the
computer is in suspend mode or hibernation mode. If no
external monitor is attached when the computer resumes,
the LCD remains blank and output is not displayed. This
restriction does not depend on the resolution value.
Resolutions, Color Depths, and Frame Rates:
The
following tables show the resolutions, color depths, and frame rates
available with your computer or external monitor. Use these tables
to set the display output (LCD Only, CRT Display Only, or Both
LCD and CRT Display).
When installing an operating system, you must install the display
driver supplied with the computer to use XGA mode.
68 IBM ThinkPad 600E User's Reference
