Replacing an UltraslimBay Device
Warm-Swaping a Device in the UltraslimBay
Warm swap
means to remove or reconnect a device when the
computer is in suspend mode. Warm swap is enabled as a default
for your computer.
To check whether warm swap is enabled, do as follows:
1
Start the ThinkPad Configuration program.
“ThinkPad Configuration Program” on page 25.
2
Click on UltraBay ( ).
3
Make sure that there is a check mark in the Enable IDE
device Hot/Warm Swap check box.
If there is no check mark, put a check mark in the box and
restart your computer to make the change effective.
To warm-swap a device in the UltraslimBay, enter the computer into
suspend mode; the swap the device.
Make sure that the bay LED is off when you remove the
UltraslimBay device.
Bay LED
(Bottom view)
90 IBM ThinkPad 600E User's Reference
