A SERVICE OF

logo

IPGSM-4GC Commercial Fire Communicator – Installation and Setup Guide
4
11. Verify the PowerBoost1 DIP switches are configured as shown below.
iPGSM-COM-008-V0
PowerBoost1
15
ON
2
3
4
15
ON
2
3
4
(Switch handle = white)
12. Ensure the following:
LED Display board is fully seated.
All wiring terminals and connectors are tight.
All wiring has been completed and secured with cable ties.
13. Install the battery (not supplied). Apply power to the 1451-UL9 Wired Transformer, and attach the battery
cable.