A SERVICE OF

logo

2-22
Static Virtual LANs (VLANs)
Port-Based Virtual LANs (Static VLANs)
Displaying the Configuration for a Particular VLAN. This command
uses the VID to identify and display the data for a specific static or dynamic
VLAN.
Syntax: show vlans <vlan-id>
Figure 2-15. Example of “show vlans” for a Specific Static VLAN
Figure 2-16. Example of “show vlans” for a Specific Dynamic VLAN
ProCurve(config)# show vlans 22
Status and Counters - VLAN Information - Ports - VLAN 22
VLAN ID : 22
Name : VLAN22
Status : Port-based Voice : No
Jumbo : No
Port Information Mode Unknown VLAN Status
---------------- --------- ------------ ---------
1 Tagged Learn Up
5 Untagged Learn Up
6 Untagged Learn Up
Show vlans lists this
data when GVRP is
enabled and at least
one port on the switch
has dynamically
joined the designated
VLAN.
ProCurve(config)# show vlans 33
Status and Counters - VLAN Information - Ports - VLAN 33
VLAN ID : 33
Name : GVRP_33
Status : Dynamic Voice :
Jumbo :
Port Information Mode Unknown VLAN Status
---------------- --------- ------------ ---------
2 Auto Learn Up