Chapter 7 Menu description tables
80
7-3-2 MATRIX
Item/
Data storage
Variable
range
Remarks
$ MATRIX TABLE
A
B
For selecting the color correction table used
to perform the adjustments.
MATRIX R-G –31
:
+00
:
+31
For performing the R-G color adjustment.
MATRIX R-B –31
:
+00
:
+31
For performing the R-B color adjustment.
MATRIX G-R –31
:
+00
:
+31
For performing the G-R color adjustment.
MATRIX G-B –31
:
+00
:
+31
For performing the G-B color adjustment.
MATRIX B-R –31
:
+00
:
+31
For performing the B-R color adjustment.
MATRIX B-G –31
:
+00
:
+31
For performing the B-G color adjustment.
The underlining in the variable range column indicates the setting in the preset mode.The underlining in the variable range column indicates the setting in the preset mode.
<Note>
Items with $ in front of their names are set by the PAINT
MENU SW ($) R/W menu items on the <CARD R/W
SELECT> screen.
Items without $ in front of their names are set by the PAINT
MENU LEVEL R/W menu item.
For details, refer to “7-6-2 CARD R/W SELECT.”
$ L MATRIX TABLE
OFF
A
B
For selecting the color correction table at
GAIN LOW.
$ M MATRIX
TABLE
OFF
A
B
For selecting the color correction table at
GAIN MID.
$ H MATRIX
TABLE
OFF
A
B
For selecting the color correction table at
GAIN HIGH.
Mg (SAT/PHASE) –63
:
+00
:
+63
For performing the magenta color correction
(saturation and hue).
R (SAT/PHASE) –63
:
+00
:
+63
For performing the red color correction
(saturation and hue).
R-Mg (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between red and magenta.
Mg-B (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between magenta and blue.
7-3-3 COLOR CORRECTION
Item/
Data storage
Variable
range
Remarks
Cy (SAT/PHASE) –63
:
+00
:
+63
For performing the cyan color correction
(saturation and hue).
Cy-G (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between cyan and green.
G (SAT/PHASE) –63
:
+00
:
+63
For performing the green color correction
(saturation and hue).
G-Yl (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between green and yellow.
Yl (SAT/PHASE) –63
:
+00
:
+63
For performing the yellow color correction
(saturation and hue).
Yl-R (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between yellow and red.
B-Cy (SAT/PHASE) –63
:
+00
:
+63
For performing the color correction (saturation
and hue) between blue and cyan.
B (SAT/PHASE) –63
:
+00
:
+63
For performing the blue color correction
(saturation and hue).
