Zanussi Washer/Dryer ZWD 12270 W won't start programme | ManualsOnline.com

Support User Manuals

when I select and press start it clicks twice then goes back to flashing and won't do any programme. Help!

Asked by Siaron on 03/06/2010 9 Answers

ManualsOnline posted an answer 14 years, 7 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

nat posted an answer 14 years, 3 months ago

3 have you fixed this problem yet, as i have the exact same problem as yours, was wondering if you have found a solution for it, email me please xcited2004@hotmail.com many thanks, nat.

Was this answer helpful?

Greg posted an answer 14 years, 2 months ago

0 heya, any solutions to this yet ? Have the exact same issue..

Was this answer helpful?

nat posted an answer 12 years, 8 months ago

0 A solution to this problem is to open the top of this washer/dryer up. You will see a long metal thick tube and at the end of that tube are 4 connectors, unplug all 4 connectors this will disable your machine, now the main washing machine will work but minus the dryer function. hope this helps, at least the washing machine will work now.

Was this answer helpful?

nat posted an answer 12 years, 8 months ago

0 here is another picture

Was this answer helpful?

nat posted an answer 12 years, 8 months ago

0 the last pic!! if you look closely at the pic you will see that the 4 connectors have already been disabled here, almost 2 years later and the washing machine works great but no dryer. oh well!

Was this answer helpful?

nat posted an answer 12 years, 8 months ago

0 Sorry corretion on my wifes last last thred. A solution to this problem is to open the top of your washer/dryer, there you will see a long wide metal thick tube, (thats where the hot air travels down to dry your cloths) at the far end of that tube are 4 connectors, unplug all 4 of the connectors as seen in the photos above, this will disable your dryer forever, thus allowing your washing machine to work as nomal but wuth minus the dryer function, hope you could live without the dryer, at least the washing machine will work for you now and hopefully for the next 5 years. Mal the DiY handyman husband.

Was this answer helpful?

nat posted an answer 12 years, 8 months ago

0 Sorry for my husband's many spelling mistakes!!!! lol

Was this answer helpful?

Tom posted an answer 11 years, 12 months ago

0 This happened to mine. This is caused when the dryer is opened during the 'anti creasing' part of the cycle i.e. when the timer is at 00:00 and the washing machine is beeping. I opened it by turning the program dial to 'off' and onto another program which opened the door. According to the manual you are not supposed to do this as the washing machine does not register as having finished the drying cycle. If you run the dry cycle again and let the anti creasing cycle finish (it lasts for about 10 minutes) the door will open automatically and the machine will register as having finished the cycle, allowing it to switch to a wash cycle.

Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.

Ask a Question Request a Manual