My Samsung SW50USP doesn't run through the cycle. When I put it on to wash, it stays washing for hours; rinse the same; as with spin. Is there an easy fix?

Asked by Fiacre Mulhall on 06/20/2014 2  Answers

ManualsOnline posted an answer 10 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 Hi and welcome to Rewarder Thank you for the question and your patience. Should you still need assistance for information purposes only... Initially, try to reset all connectors (remove then re-install) one by one to avoid mistakes. make it sure you properly insert all connectors. Reset connectors from timer going to main board. Still, the described symptom almost always point to an internal hardware issue where the likely suspect would be main board (most likely) or timer (rare likely) Mentioned above are major problem that need an actual and professional approach/checking before you replace just to confirm if there is no other damage than that. Please note: replacing it without professional checking will possibly damage it again Hope this information will be helpful. Thanks for using Rewarder! Chester
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.