1. Manuals
  2. Laundry Appliance Support
  3. Philips Support
  4. Iron Support
Support User Manuals
Question About Philips Iron 8300 steam generator
My series 8300 steam generator iron keps turning o...

My series 8300 steam generator iron keps turning off at any temperature higher than the lowest setting, and won't generate steam without switching off immediately after.

Asked by Nicky Higby on 02/06/2015 1  Answer

ManualsOnline posted an answer 9 years, 10 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Paul posted an answer 8 years, 11 months ago

0 A lot of Philips GC83xx boiler steam iron devices seem to have 'switch off' issues after about 2 years of usage. If you notice that the light around the on/off button is fading, especially when pushing the steam button, your problem might be caused by the capacitors in the power supply. Verify this by checking the power voltage (blue wire on the power board connector): it should be 24Volt dc. If this is significantly less, try replacing the big capacitor on the power board (blue or yellow, near de powerboard connector). But be carefull:  the whole board carries 240Vac, and the capacitor should only be replaced by a certified safety capacitor (X2) with the same specifications. If you are not familiar with electronics, you should contact a technician to fix this.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual