1. Manuals
  2. Laundry Appliance Support
  3. Other Support
  4. Washer Support
Support User Manuals
Question About Bosch Appliances Washer WFMC3301UC
what does error code 4 mean...

what does error code 4 mean

Asked by Dick on 04/13/2014 2  Answers

ManualsOnline posted an answer 10 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Rewarder User posted an answer 10 years ago

5 It means the pump is blocked. Bosch E04 Solution: 1. Get some towels and if possible a wet/dry vac. If the machine drained, it won't be too bad. If your machine is stuck full of water, I can't say! I'd guess you could get wet. 2. Locate the round door on the front of the machine (about 6" in diameter, lower right corner) 3. Find a drill bit or small screwdriver that fits in the hole in the round door. Insert the bit into the hole in the door. It will push in a tab, it doesn't take much force. 4. Rotate the hole (clockwise) to 6'oclock and it should come free. 5. Once the door is out of the way you'll be greeted by a 3-4" plastic cap with wings so you can unscrew it by hand. There is a small collector lip at the bottom of the cap, that is where I held my wet/dry vac to catch the water. Unscrew slowly so you don't get flooded. Take your time and keep unscrewing it until it is free. 6. Pull out the trap that you just unscrewed and you'll most likely see the item that caused the E04 error code. There is an side of the trap that is marked that it needs to be installed facing downward, so watch for that when you put it back in. 7. Read these directiosn upside down and backwards to put it all back together. 8. Run a load and watch for leaks. You could leave the door off until you are sure you screwed the cap in tight enough.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual