Help my unit shows the fault code EHE

Asked by Tim White on 09/16/2008 4  Answers

ManualsOnline posted an answer 16 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here
5 Take the rear cover off. Inside is a retangular box containing the heating element take this off and dry it out. I used a hair dryer. Mine works fine now! Make sure you clean out the strip filter at the front and the sensor just below it. Also clean out the condensor unit, put your arm right inside and mop up any water in the back off the chamber..
Was this answer helpful?
0 Brill well done
Was this answer helpful?
0 If your dryer haas a black condensing hose running out the back, pull it from the laundry box. Blow into the hose. If you hear bubbling, there's water that needs to be drained. Grab a large bowl, suck on the hose briefly to start siphoning and then drain excess water into bowl. Unplug the dryer before attempting any repairs.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.