1. Manuals
  2. Laundry Appliance Support
  3. GE Support
  4. Clothes Dryer Support
Support User Manuals
Question About GE Clothes Dryer dbxr453gaoww
belt...

i need to replace a broken belt

Asked by linda on 10/19/2008 1  Answer

ManualsOnline posted an answer 15 years, 11 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Tim posted an answer 15 years, 10 months ago

5 1. open door, remove 2 screws near top. 2. Remove top by lifting from the front. 3. remove 2 screws that attach from from each side up top. 4. Swing the front to the left, careful not to pull the wires for the light and switch. 5. remove wires from the switch, taking note which one attaches where. 6. remove 2 screws from front about 6" up from the bottom. This will allow you to open the sides a little wider to allow the drum to come out. 7. pull the drum out the front, while walking the belt off the back of the drum 8. you can install a new belt, and repeat the process to close it up again. The tricky part when installing the belt is to make sure you have the pulley in the proper orientation. Link below, will outline the instructions and offer pictures.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual