1. Manuals
  2. Laundry Appliance Support
  3. Frigidaire Support
  4. Washer Support
Support User Manuals
Question About Frigidaire Washer 134334000A (0403)
Which two buttons must be pressed to start the cle...

Which two buttons must be pressed to start the cleaning cycle?

Asked by on 10/14/2013 2  Answers

ManualsOnline posted an answer 11 years, 3 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

Chris posted an answer 11 years, 2 months ago

0 Hello Jeanne7168, I am happy to assist you! I understand you are seeking information on which buttons should be selected to start the Self Clean cycle. However, it appears above-listed model number is invalid. The serial tag, which lists your model number, is typically located inside the storage drawer, on the right side. With this information I can provide the correct appropriate settings. Meanwhile, generally speaking, to set the controls for a self-clean the first step is to confirm that the clock shows the correct time of the day. Press CLEAN. "---" appears in the display. Press the UP ARROW or DOWN ARROW once. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press DOWN ARROW"2:00" appears in the display. As soon as the controls are set, the motor drive lock will begin to close automatically and the "LOCK" indicator light will flash. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the over door to lock). "CLn" will appear in the display during the Self-Clean cycle and the "LOCK" light will glow until the Self-Cleaning cycle is complete or cancelled and the oven temperature has cooled. When the Self-Clean cycle has completed, the time of the day or "End" will appear in the display window and the "Clean" and "LOCK" light will continue to glow. Once the over has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. If "End" is the display and the Clean indicator light remains ON, press CLEAR/OFF. The time of the day will appear in the display. If it becomes necessary to stop or interrupt a Self-Cleaning cycle, press CLEAR/OFF. Once the oven has cooled down for about 1 HOUR and the "LOCK" light has gone out, the oven door can be opened. Restart the Self-Clean cycle once all conditions have been corrected. I hope this information helps to some degree. If you have any additional questions and if your range does not have these options available for Self-Cleaning, please feel free to reconnect!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual