1. Manuals
  2. Laundry Appliance Support
  3. Bosch Appliances Support
  4. Washer Support
Support User Manuals
Question About Bosch Appliances Washer WFMC2201UC
my washing machine wont start the start/pause butt...

my washing machine wont start the start/pause button it just blinks the whole time. I have tried every cycle. ANy suggestions?

Asked by Holli Miller on 02/02/2012 2  Answers

ManualsOnline posted an answer 12 years, 8 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

George posted an answer 12 years, 7 months ago

0 If the LED above the button is blinking, then you know the door switch is good. Door switch if not operable, the LED will not illuminate. Majority of the time the micro switch soldered to the control board is faulty. Taking the control board assembly apart and removing the PC board, you can see the micro switch soldered to the board. Using a lot of care you can pop the top off switch, slowly lift since part of it is soldered to board. Remove green plunger and underneath is a brass poppet that you remove. Using scotch brite or steel wool, clean bottom of poppet and the small terminals on the plastic base (three). replace poppet, plunger and snap top back on micro switch and you are ready to go. See this a million times in the field.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual