1. Manuals
  2. Laundry Appliance Support
  3. Black & Decker Support
  4. Iron Support
Support User Manuals
Question About Black & Decker Iron None
Cleaning...

I can't locate my manual - don't know what to do to clean the iron. Help?

Asked by Sandi on 11/09/2008 3  Answers

ManualsOnline posted an answer 16 years ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

ejsoule posted an answer 16 years ago

6 Here's what I found on cleaning the iron. ABOUT THE SELF-CLEANING SYSTEM • Use the self-cleaning system to flush out minerals and lint. If lint is allowed to accumulate in the vents, it can scorch and cause brown spotting. For Models D2000 and D2020: Clean about once a month. For Models D2010, D2030 and D2035: A "CLEAN" indicator will appear in the digital display to notify you when your iron needs cleaning (A). • Fill the iron as described in "How to Use" but keep the water level below the MAX line. Plug in the iron, set the temperature to 6, and stand the iron on its heel rest. Allow to heat about 3 minutes. • Unplug the iron and take it to a sink. Holding it horizontally over a sink, move and HOLD the variable steam dial in the CLEAN position ( ). There may be some hissing and spitting while self-cleaning. This is normal. • Stay clear of HOT steam and boiling water as it comes out of the vents while lint, scale, and minerals flush through! Continue to hold the variable steam dial in the CLEAN position until all the water has emptied. If necessary, rock the iron side to side and front to back to empty it. • When finished, release the variable steam dial, stand the iron on its heel rest, and plug it in. Heat for about 2 minutes to dry out any remaining water then unplug.
Was this answer helpful?

Sandi posted an answer 16 years ago

4 Thanks so much!
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual