Whirlpool WGD8200Y Clothes Dryer User Manual


  Open as PDF
of 2
 
Gas Dryer
PRODUCT MODEL NUMBERS
Recommended Installation Spacing:
WGD8200Y, WGD8400Y,
WGD8600Y, WGD8800Y
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.
Back view: Bottom view:Side view with open door dimensions:
Spacing for recessed area or closet installation
All dimensions show recommended spacing allowed, with
tested spacing of 0" (0 mm) clearance on sides and rear.
■ Additional spacing should be considered for ease of
installation and servicing.
■ Additional clearances might be required for wall, door, and
oor moldings.
■ Additional spacing should be considered on all sides of the
dryer to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation
openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilitation openings are
acceptable.
■ Companion appliance spacing should also be considered.