Filter
Top Products
Gas Dryer
PRODUCT MODEL NUMBERS
Front view:
Side view:
Back view: Recommended Installation Spacing:
Installation spacing for recessed area or closet installation
The dimensions shown below are for the recommended spacing for this dryer.
■ Additional spacing should be considered for ease of installation and servicing.
■ Additional clearances might be required for wall, door, and oor moldings, and dryer venting.
■ Additional spacing of 1" (25 mm) on all sides of the dryer is recommended to reduce noise transfer.
■ For closet installation, with a door, minimum ventilation openings in the top and bottom of the door are required.
Louvered doors with equivalent ventilation openings are acceptable.
■ Companion appliance spacing should also be considered.
W10372564
06/2011
WGD7990X
27"
(686 mm)
42
3
/8"
(899 mm)
1
5
/16"
(33 mm)
30
7
/8"
(783 mm)
54
3
/
8
"
(1381 mm)
23
1
/
2
"
(597 mm)
Door open view:
24 in.
2
(155 cm
2
)
48 in.
2
(310 cm
2
)
1"
(25 mm)
1"
(25 mm)
5"
(102 mm)
3"
(76 mm)
34" recommended
(864 mm)
18" min.
(457 mm)
3"
(76 mm)
NOTE: Most installations require a minimum 5" (102 mm)
clearance behind the dryer for the exhaust vent with elbow.
See “Venting Requirements”.