Filter
Top Products
10
Turn cycle knob to choose
your wash cycle. Estimated
Time Remaining will light up
with a cycle time. You may notice time adjusting during the
cycle. This is normal.
If you do not want to begin a cycle immediately, you may
choose DELAY WASH option.
To choose a delay time:
1. Press DELAY WASH button to select desired delay time.
2. Press START/PAUSE.
To cancel delaying a cycle:
1. Press START/PAUSE again to begin a wash cycle
immediately.
IMPORTANT: When delaying a cycle, use liquid HE
detergent only in the dispenser. Powdered detergents may
absorb moisture from a previous cycle and clump before
the wash cycle begins.
8. Select cycle
9. Select cycle modiers
Once you select a cycle, the default modiers for that cycle will
be lit. Press the cycle settings buttons to change the Soil Level,
Spin Speed, and Wash Temp, if desired. Not all settings are
available with all cycles.
NOTE: Always read and follow fabric care labels instructions
to avoid damage to your garments.
7. Press POWER to turn on washer
Press and hold POWER to turn on the washer.
Wash Temp Suggested Fabrics
Hot
Some cold water is added
to save energy. This will be
cooler than your hot water
heater setting
Whites and pastels
Durable garments
Heavy soils
Warm
Some cold water will be
added, so this may be cooler
than what your previous
washer provided.
Bright colors
Moderate to light soils
Cool
Warm water is added to assist
in soil removal and to help
dissolve detergents.
Colors that bleed or fade
Light soils
Cold
Warm water may be added to
assist in soil removal and to
help dissolve detergents.
Dark colors that bleed or fade
Light soils
Eco Cold
This is the cold water
temperature from your faucet
without warm water added.
Dark colors that bleed or fade
Light soils