Filter
Top Products
15
Rinse/Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and High speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
A Rinse/Spin cycle is useful for
■ Loads that need rinsing only, like swimsuits.
NOTE: For mor
e delicate loads, when using a Rinse & Spin
cycle to rinse swimwear, change the Speed Spin Modifier
setting to Medium or Low to avoid fabric stress.
■ Adding fabric softener to a load.
Drain/Spin
Use this cycle to drain your washer or to drain and spin your wash
load. The spin speed is preset to High. If desired, you can reduce
the spin speed by selecting the speed you want from the SPIN
SPEED modifier.
NOTE:
Loads of synthetics, delicate fabrics, hand washables, and
woolens should be drained with no spin or low spin speed to
avoid fabric stress.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will be
momentary pauses. You will hear water spraying and splashing
during the wash and rinse cycles. These new sounds and pauses
are part of normal washer operation.
Options
You can customize your wash by adding options to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all options are
available with all cycles. Available options will glow amber. Current
selections will glow green. If an option is unavailable with a
selected cycle, the light will not illuminate.
■ See the “Laundry Guide” for an overview of possible options
for each Wash Cycle selection.
■ You can select more than one option for a cycle. Some
options cannot be added to some cycles. If an option is
unavailable with a selected cycle, there will be 3 short tones,
an
d the light for that option will not glow when selected.
Delay Wash
To begin the wash cycle later, select DELAY WASH until the
desired delay time (in hours) shows in the Estimated Time
Remaining display, and then select START. The countdown to the
wash cycle will show in the display window, and the button
indicator will blink until the cycle begins.
IMPORTANT: W
hen delaying a cycle, use only powdered
detergents in the main wash compartment since liquid detergents
may seep out of the compartment during Delay Wash, before the
wash cycle begins.
TumbleFresh™ option
Use this option when you are not able to unload your clothes,
soon after the wash cycle ends. This option provides periodic
tumbling for up to 6 hours to help freshen your clothes. During
this time, the “Done” indicator
remains activated, the door
remains locked, and the TumbleFresh™ indicator light will flash.
The TumbleFresh™ option will automatically stop and the door
lock will be released after this time expires, or if you press cancel
at anytime to unload your laundry.
Deep Clean
Use this option for heavily soiled loads that need improved stain
treatment, loads with multiple types of stains, or loads you
suspect as having stains, but are afraid may
have been missed
(no sorting or searching for stains). When Deep Clean is selected,
the
water temperature of the selected wash cycle is automatically
set to warm. The water will then be slowly heated to the temperature
selected, to aid in stain removal. This option will provide optimal
removal of organic stains such as blood and grass.
Pre Soak
Use this option for loads of heavily soiled items that need
pretreatment.
■ Add detergent to Main Wash compartment of the dispenser
drawer.
This option adds tumbling time
prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.
Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Press CYCLE SIGNAL to select Loud,
Soft, or Off. To activate/deactivate button sound hold cycle signal
button for 3 seconds.