Filter
Top Products
5
Do not operate your washer in temperatures below 32°F (0°C).
Some water can remain in the washer and can cause damage in
low temperatures. See “Washer Care” in the Washer User
Instructions for information on winterizing.
Installation clearances
■ The location must be large enough to allow the washer door
to be fully opened.
■ Additional spacing should be considered for ease of
installation and servicing. The door opens more than 90°,
and it is not reversible.
■ Additional clearances might be required for wall, door,
and floor moldings.
■ Additional spacing of 1" (25 mm) on all sides of the washer
is recommended to reduce noise transfer.
■ Companion appliance spacing should also be considered.
Washer Dimensions
Recommended installation spacing for custom undercounter
installation
The dimensions shown are for the recommended spacing.
Custom undercounter installation - Washer only
Recommended installation spacing for recessed or closet
installation, with or without a pedestal
The dimensions shown are for the recommended spacing.
Recessed area or closet installation
Recessed or closet installation - Washer on pedestal
50¼"
(1276 mm)
27"
(686 mm)
36"
(914 mm)
30½"
(775 mm)
1"
(25 mm)
1"
(25 mm)
36" min.
(914 mm)
27"
(686 mm)
2" (50 mm)
A. Side view - closet or confined area
B. Closet door with vents
A. Recessed area
B. Side view - closet or confined area
48"
(1220 mm)
A
B
3"
(76 mm)
3"
(76 mm)
1"
(25 mm)
4"
(102 mm)
30
½"
(775 mm)
48 in.
2
(310 cm
2
)
24 in.
2
(155 cm
2
)
1"
(25 mm)
30
½"
(775 mm)
1"
(25 mm)
1"
(25 mm)
27"
(686 mm)
4"
(102 mm)
38" min.
(965 mm)
A B