Filter
Top Products
4-8
REMOVING THE DETERGENT DISPENSER
MOTOR & ASSEMBLY
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
1. Unplug washer or disconnect power.
2. Turn off the water supply to the washer.
3. Remove the top cover and the console
(see page 4-2 for the procedures).
4. To remove the detergent dispenser
motor:
a) Unhook the spring from the end of the
water distribution lever.
b) Carefully pull the cam actuator and the
water distribution lever off the motor
shaft, then pull the water distribution
lever off the lever connection pin.
Detergent
Dispenser
Motor
Pull Off Shaft
Disconnect
Spring
Remove
From Pin
Water
Distribution
Lever
c) Remove the two motor screws and
remove the motor from the detergent
dispenser.
Cam
Actuator
Motor Screws