CKS1 Compact Stainless Steel Kettle User Manual CKS1 Compact Stainless Steel Kettle User Manual
SAFETY GUIDE
Please follow all the precautions listed below for safety
and to reduce the risk of re, injury or electrical shock.
Read all the instructions before operating the appliance
and keep them for future reference. If you pass the product
on to a third party, include these instructions.
Do not touch the body of the kettle when it is hot. •
Always hold the appliance by the handle when using it.
Always ensure the lid is closed when in use. Failure to •
close the lid will prevent the thermostat from switching
o and cause the kettle to boil dry.
Keep the appliance well away from hot surfaces, and •
objects that can be damaged by heat.
Ensure there is adequate room to operate the kettle and •
that steam can escape safely.
Avoid contact with the steam from the spout when the •
water is boiling or just after it has switched o.
Be careful when opening the lid for re-lling when the •
kettle is hot.
Ensure that the kettle cannot fall into water. •
Do not ll or pour water from the kettle while it is on •
the base.
Disconnect the kettle at the mains supply before •
lling or emptying the jug, before cleaning any of its
components, and when it is not in use.
Do not immerse the connecting cord in water or other •
liquids.
Do not allow liquids to come into contact with the •
terminal pins of the kettle, its base or the connecting
cord.
Do not let the connecting cord overhang the edge of the •
work surface or allow it to touch hot surfaces or sources
of heat or ame.
If any part of this appliance is damaged or malfunctions •
in any way, or the connecting cord or mains plug is broken
do not continue to use it. Seek expert assistance.
This appliance is not intended for use by persons •
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliances by a person
responsible for their safety.
Children should be supervised to ensure that they do •
not play with the appliance.
CAUTIONS
Do not place the power base unit on a metal tray or •
metal surface when plugged into any power source.
This appliance is for indoor domestic use only. Do not •
use it outdoors.
This kettle jug and power base form an integral •
appliance. Do not use other kettle jugs with this power
base, or this kettle jug with other bases.
The switch on this appliance must be readily operable •
at all times. Do not hinder its operation by incorrect
placement or by placing obstacles that may restrict its
free movement.
WARRANTY
Your TESCO appliance is warranted for 12 months from the
date of purchase. If a fault develops during this period,
please return the unit to your nearest Tesco store together
with the original receipt as proof of purchase. This warranty
in no way aects your consumer rights.
SPECIFICATIONS
Voltage Rating: ........................220-240 V~, 50 Hz
Power Consumption: ................1850 - 2200 W
Water Capacity .........................1 litre
Net Weight ...............................0.78 kg
IMPORTANT: THIS APPLIANCE MUST BE EARTHED
UK: Waste electrical products should not be
disposed of with household waste. Separate
disposal facilities exist, for your nearest
facilities. See www.recycle-more.co.uk or in-
store for details.
ROI: Produced after 13th August 2005. Waste
electrical products should not be disposed of
with household waste. Please recycle where
facilities exist. Check with your Local Authority
or retailer for recycling advice.
PRELIMINARIES
Unpack your kettle and any accessories carefully. Retain the
packaging so that you can transport the appliance safely. If
you dispose of it please do so with regard to any recycling
regulations in your area.
Before using your kettle:
Check that the voltage marked on the rating plate under
the kettle or the base matches your mains voltage. Please
read all the instructions in this User Guide with particular
reference to the safety notes.
CONNECTING AND USING THE KETTLE
Separate the kettle from the base.
Ensure that the mains socket is switched o at the wall. Lead
the power cord out through the recess in the base. Place the
kettle base on a stable level surface and connect the power
cord to the wall socket. Excess cord may be safely stowed by
feeding it carefully into the stowage compartment in the
base. Ensure the power cable exits through the cut out slot
otherwise the kettle base will not be stable.
Pour away previously boiled water and use fresh water to
ll the kettle.
CONTROLS AND FEATURES
Lid release1.
Lid2.
Spout3.
Filter (inside spout)4.
Jug5.
Base6.
Mains lead7.
Power ON/OFF switch8.
Water scale (behind handle)9.
Handle10.
Pull the lid release back gently to open the kettle lid. Fill the
kettle to the desired level through the lid. Close the lid.
The water level must always cover the lowest mark on the gauge.
Do NOT ll the kettle above the MAX mark (1 litre) or boiling
water may be ejected. If you cannot see the water level through
the scale, the level is incorrect.
Position the lled kettle correctly on the power base.
Boiling the Kettle:
Before rst use or after storage:
Fill the kettle with fresh water. Boil the water. Pour away the
boiled water. Repeat this two or three times. The kettle is now
ready for use.
Switch on the power at the wall socket.
The kettle ON/OFF switch is located below the handle. Press this
down to switch the kettle on.
When the water has boiled, the kettle will switch o
automatically. You can stop the boiling at any time by lifting the
switch up.
To re-boil, depress the switch again. If the water is very hot, it
may be necessary to wait until the switch resets.
