Filter
Top Products
Other TechniquesOther Techniques
1.Placing the pressing cushion between the fabric and the Pressing Plate may help with delicate fabrics.1.Placing the pressing cushion between the fabric and the Pressing Plate may help with delicate fabrics.
2.Buttons and Zippers: if you have older types of buttons or zippers, you may need to take special
care to avoid melting. In order to do so, place the garment face down and cover with a pressing
cushion before pressing.
2.Buttons and Zippers: if you have older types of buttons or zippers, you may need to take special
care to avoid melting. In order to do so, place the garment face down and cover with a pressing
cushion before pressing.
3.Spray bottle may be used to spray the fabric lightly. This will further help to remove stubborn wrinkles.3.Spray bottle may be used to spray the fabric lightly. This will further help to remove stubborn wrinkles.
4.Place a damp cloth over the fabric before pressing, which will help with stubborn wrinkles or heavy
gauge fabrics.
4.Place a damp cloth over the fabric before pressing, which will help with stubborn wrinkles or heavy
gauge fabrics.
5.To press large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed.
5.To press large pieces of fabric, place entire piece behind the Ironing Board. Pull the fabric towards
you, over the Ironing Board, and lower the Pressing Plate. Press the fabric in sections until completed.
1.For garments constructed with details such as darts, curved seams, and
shoulder pads, a Pressing Cushion may be used.
1.For garments constructed with details such as darts, curved seams, and
shoulder pads, a Pressing Cushion may be used.
2.Use the cushion in areas where no creases are desired or to shape a tailored
garment.
2.Use the cushion in areas where no creases are desired or to shape a tailored
garment.
3.Place the area to be pressed onto the Ironing Board.3.Place the area to be pressed onto the Ironing Board.
4.Place the Pressing Cushion under the dart, seam, etc.4.Place the Pressing Cushion under the dart, seam, etc.
5.Making sure that the area to be pressed is raised, lower the Pressing Plate
until it meets the raised area.
5.Making sure that the area to be pressed is raised, lower the Pressing Plate
until it meets the raised area.
6.Do not force the plate to its lowest position, as this may cause damage to the unit.6.Do not force the plate to its lowest position, as this may cause damage to the unit.
Using the Pressing CushionUsing the Pressing Cushion
1111
TIPS PRESSINGTIPS PRESSING