Sears 134411800 Washer Accessories User Manual


  Open as PDF
of 1
 
Meter Case Installation Hardware
Contents: Tools Required:
3/8 x 16 lock nut (1) 9/16 socket and drive
Installation Instructions:
1. Remove meter case access door.
2. InstaII 3/8 lock nut onto security bolt and tighten securely.
3. InstaII meter case access door.
INSTRUCTIONS TO CHANGE THE NUMBER OF COIN SLIDE INSERTIONS TO START APPLIANCE,
1. Disconrtect power from machine,
2. ]urn Shaft & Cam Assembly in a clockwise direction until switch lever arm drops into cam notch
(Fig. 2),
3. Lift Adjusting Tab away from cam with finger and turn Tab to desired number. Make sure Tab\
locks into place in new position,
4. ]urn Shaft & Cam Assembly in a clockwise direction until switch lever arm is on top of lab to
assure that both mechanism switches are open (Fig, 3)
5. Reconnect power to machine,
-:--CAM NOTCH
,\
_ADJU ST:tENT
\ _ TAB
\ \
FIGURE 2
--DSE FINGER TO
LIFT
2/
I CLOCKWZSE
DIRECTION
TAB
__ SWITCH LEVER AP$1
FIGURE 3
P/N 134411800 (0403)