National Instruments SCC-LP02 Dryer Accessories User Manual


 
SCC-LP Series Lowpass Filter Modules User Guide 8 ni.com
Stability
Gain temperature coefficient ..................10 ppm/°C typ
20 ppm/°C max
Offset-voltage
temperature coefficient ...........................3.4 µV/°C typ (RTI)
27 µV/°C max
Power Requirement
Analog power
SCC-LP01, SCC-LP02....................135 mW max
+15 V........................................4.5 mA max
–15 V ........................................4.5 mA max
SCC-LP03, SCC-LP04....................475 mW max
+15 V........................................15.8 mA max
–15 V........................................15.8 mA max
Digital power ..........................................0.0 mW max
Physical
Dimensions .............................................8.89 cm × 2.92 cm × 1.85 cm
(3.50 in. × 1.15 in. × 0.73 in.)
Mass........................................................37 g (1.3 oz)
I/O connectors.........................................One 20-pin right-angle
male connector,
one 4-pin screw terminal
Field-wiring diameter .............................28 to 16 AWG
Maximum Working Voltage
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth (inputs)........................±15 V, Installation Category I
Channel-to-channel (inputs) ...................±15 V, Installation Category I
Environmental
Operating temperature ............................0 to 50 °C
Storage temperature ................................–20 to 70 °C