Filter
Top Products
Altering the volume of the
buzzer
The buzzer has two volumes.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that:
–
The tumble dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the jk button in.
Wait until the indicator light for the Start/
Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
twice.
–
The Low temperature indicator light
will briefly flash on and off four times.
– P and 0 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 Normal buzzer
(Default setting)
I Loud buzzer
(The Automatic plus indicator light
will also flash)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the dryer off with the jk
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
47