Filter
Top Products
Problem Possible cause Remedy
The Clean out airways
indicator light comes
on.
The dryer is not working
efficiently or
economically.
Possible cause: the filter
is clogged with fluff or
with detergent residues.
–
Cleaning the filter is
usually all that is
required.
However, if the Clean
out airways indicator
light does not go out
after you have cleaned
the filter, then also
check all the possible
causes described
under "The drying
process goes on too
long or even switches
off".
To switch off this
reminder:
– Open and shut the
door with the dryer
switched on.
The vent ducting may be
very long, which does not
constitute a fault.
If very long ducting is
used, then programme
times will be longer and
energy consumption
higher.
The Clean out airways
indicator light can be
deactivated (see
"Programmable
functions").
The programme stops
and
the Clean out airways
indicator light comes
on.
The buzzer sounds.
See above for possible
causes and their
remedies.
–
Try to resolve the
problem by following
the instructions given
above.
–
If this problem
happens again,
contact Miele.
Problem solving guide
29