Filter
Top Products
Cleaning the surfaces of the
fluff filters
Hair and fluff on garments are collected
by the fluff filters in the door and the
door opening.
Tip: You can use a vacuum cleaner to
remove the fluff.
Clean the surfaces of the fluff filters
in the door and the door opening
after each drying programme.
1. In the door.
^
Open the door and pull the fluff filter
(1) out of the door as illustrated.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the surface of
the filter.
Extra cleaning
^
Remove any fluff from the hollow part
of the door with a bottle brush or a
vacuum cleaner.
^
Also clean the door seal (2) with a
damp cloth.
^
Push the filter back into the door until
it clicks into position. Ensure it is
facing the correct way.
2. In the door opening.
^
Use your fingers or a vacuum cleaner
to remove the fluff from the two fluff
filters in the door opening.
^
Close the door.
Cleaning and care
29