Filter
Top Products
Altering the volume of the
buzzer
The buzzer has two volumes.
Normal
The buzzer sounds at the end of a
programme (default setting).
Loud
The buzzer sounds at maximum volume
at the end of a programme.
Follow steps A to F to programme
and store in memory.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
once.
–
The Low temperature indicator light
will briefly flash on and off four times.
– P and 0 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 Normal buzzer
(Default setting)
i Loud buzzer
(The Automatic indicator light will
also flash).
E Pressing the Start/Stop button
switches from one to the other. You
will hear the two buzzer volumes as
youdoso.
F Switch the dryer off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
46