Low temperature
For all delicate or minimum iron
fabrics with the r symbol on the care
label (e.g. acrylic garments).
–
The programme duration is longer.
–
On some programmes Low
temperature is a standard part of the
programme and so cannot be
deselected.
Buzzer
A buzzer sounds (at intervals for a
maximum of 1 hr) to let you know the
programme has finished.
The buzzer will still sound if there is a
fault, even if it has been switched off.
Delay start
The start of a programme can be
delayed by 30 minutes up to 24
hours.
After selecting a programme:
^
Press the Delay start button
repeatedly until the required delay
period shows in the display.
–
The Delay start indicator light will
flash.
–
Times of:
up to 10^ are selected in 30 minute
steps
more than 10^ in 1 hour steps
–
If you keep the Delay start button
pressed in, the time will continue to
increase up to 24^.
To begin delay start
^
Press the Start/Stop button.
–
The Delay start indicator light will
light up constantly.
The delay start time counts down
towards the start of the programme as
follows:
–
more than 10^ by the hour
–
less than 10^ in minutes
The drum will turn briefly every hour to
help prevent creasing.
While the delay start time is counting
down, you can still add laundry to the
drum:
^ Switch the dryer off.
^ Open the door and add the laundry.
^ Close the door and switch the dryer
back on again.
To cancel/alter delay start
^
Press the Start/Stop button.
This cancels delay start.
^
To alter the delay start time, press the
Delay start button repeatedly until the
required delay period shows in the
display.
^
Press the Start/Stop button.
The altered delay start time will start
counting down from the beginning
again.
Extra options / Delay start
15