Filter
Top Products
Clean out airways indicator
Fluff should be removed after drying.
The Clean out airways indicator will
remind you to clean the filters when a
certain amount of fluff has collected
in the filters. You can decide at what
level of fluff this reminder should be
given.
You will have an idea of how often this
should be done after a few drying
programmes.
Follow the steps (A,B,C ...) to
programme and store in memory.
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Switch the dryer on.
Wait until the Start/Stop button lights up
constantly ...
C . . . and then release the Start/Stop
button.
D Press the Low temperature button
eight times.
–
The Low temperature indicator light
will flash on and off slowly once.
A number to show which option is
selected will appear in the display
alternating with the letter P.
0 Clean out airways indicator light
deactivated
I Clean out airways indicator light
comes on when there is a heavy
build-up of fluff
(the Automatic plus indicator light will
also flash once).
2 Factory default setting
(the Automatic plus indicator light will
also flash twice).
3 Clean out airways indicator light
comes on when there is only a
light build-up of fluff
(the Automatic plus indicator light will
also flash three times).
E Pressing the Start/Stop button
switches between the options.
F Switch the dryer off.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check the setting:
^
Carry out steps A to D.
^
Switch the dryer off after step D.
Programmable functions
59