Filter
Top Products
,
To secure all connections use
appropriate Teon tape orathread
compound.
Usea10" slip joint wrench only.
^ At the end of the dryer's gas
connection hand screw on the
3
/
8
" NPT elbow.
Using a wrench tighten the elbow
withahalf turn.
^ Secure the gas connection with
Teon tape or thread compound.
^ Install a
3
/
8
" are union adapter, a , to
the female elbow, b .
Hold the elbow with a wrench.
The maximum amount o orce used
should be 531 lb n. (60 Nm).
^ Secure the exible metal gas line
connector to the adapter.
Gas connection
16