Filter
Top Products
Changing a programme while
it is running
You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
Cancelling a programme
^
Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
again during the cooling down
phase, Finish will light up in the
display.
^ Switch the dryer off and then on
again.
^
You can now select a different
programme.
Interrupting a programme
^
Switch the dryer off.
To continue drying
^
Switch the dryer on.
The programme will continue, as long
as the cooling down phase has not
been reached.
Adding or removing laundry
after a programme has started
^
Press the Door button.
^ Open the door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^ Add or remove items as required.
^ Close the door.
^ Press the Start/Stop button.
Note
The time remaining shown in the
display may now vary from the actual
drying time.
Changing the programme sequence
19