Programmable functions
Notes
The programmable functions can be
used to create drying programmes to
suit your individual requirements.
They will remain in the machine’s
memory until cancelled.
One or all of the programmable func-
tions can be activated or cancelled
(See following page).
Correcting the drying level
The Sensitive System aims to dry
using as little energy as possible.
However, if you require the washing
to be drier, it is possible to reduce
the final moisture level on all pro-
grammes. (It is not possible to alter
an individual programme).
The machine is delivered with this func-
tion switched off.
Buzzer
An audible tone sounds repeatedly
at the end of a programme.
The machine is delivered with the buzz-
er switched on, but it can be switched
off (see next page).
The volume of the buzzer can be al-
tered (the pitch changes at the same
time).
Proceed as follows:
1. Select the programmable function
“Buzzer”(see next page,
points
1 to 6).
2. Press the “START” button. The
indicator light for “machine iron”
goes out.
3. Press the “START” button again and
keep it pressed in. The indicator
light for “machine iron”
will light up.
4. Release the “START” button when
the volume you want is reached.
5. Turn the programme selector to the
“Finish” position.
6. Switch the machine off with the
“I-On/0-Off” button.
The change to the volume has
been stored in memory.
To switch the buzzer off altogether see
the next page (points
1 to 0).
Memory
The additional options selected pre-
viously for specific programmes are
stored in the machine’s memory.
The memory programmable function can
be used to switch the memory function
on or off. The machine is delivered with
the memory function activated.
Anti-crease
Once a programme has ended, the
drum will turn at regular intervals to
prevent the laundry from settling into
creases and folds.
This programmable function can be
used to switch the memory function on
or off. The machine is delivered with
the “Anti-crease” function activated.
Programmable functions
18