Filter
Top Products
19
x
Select
Program
Timed dry progr.
< Next >
x
Select
Program
Extra dry
< Next >
CREATE YOUR OWN DRYING PROGRAMME
1. Press one of the buttons
P1
-
P4
under
which you wish to store your programme. You
can select any button you like if you only want
to make a temporary programme.
2. Index forward with the
Menu
button to the
first setting or option that you wish to change.
If the child lock is activated, nothing will hap-
pen. Hold down the button for 3 seconds, and
then press as usual.
All the programme types, settings and options
are described in the table alongside.
3. If you wish to change a setting, you should
index forward or back with the
but-
tons until the desired setting appears in the dis-
play.
4. Then index further with the
Menu
button to
the next setting/option, and change it in the
same way if required.
5. Index further and make changes in the same
way until the finished programme appears in
the display together with any options. The text
Stop will be displayed on the bottom line.
You can now use the programme without sto-
ring it (temporary programme). Press the
button to start the programme.
Store the programme
If you wish to store the programme for use
whenever you intend to use the tumble dryer,
press the
Enter
button before starting. The but-
ton selected by you originally (P1-P4) will ap-
pear at the bottom left of the display.
You can now select the programme by pres-
sing the button chosen by you in Step 1.
NOTE
The Delayed start option is not stored perma-
nently.
IMPORTANT
If you store a programme by mistake, you can
reset it to its settings at the time of delivery; see
Reset programme later in this Chapter.
TIP
If you do not wish to index through all the
settings, you can terminate the input by pres-
sing the
Enter
button ONCE. To store the pro-
gramme, you must then press the
Enter
button
once more.
INTERRUPT INPUT
If you change your mind and wish to interrupt
the input sequence, you should switch off the
dryer with the main power switch
. When
you switch it on again, you can start from the
beginning or select one of the pre-set program-
mes as usual.
x
Timed dry r Time
Normal cooling 60
Temperature low
Stop