Filter
Top Products
Operating lips ..... ................................................
Clean the Lint Filter...
• after each load.
• to shorten drying time.
• to operate more energy efficiently.
NOTE: Do not operate the dryer without the lint filter in place.
Load the Dryer Properly...
• by placing only one wash load in the dryer at
a time.
• avoid very small loads or mixing heavyweight and /
lightweight clothes.
• when only one or two articles need drying, add a
few similar items to improve tumbling and drying
efficiency.
N2_
Add A Fabric Softener Sheet...
(If Desired)
• after loading the dryer.
• to control static cling.
• before the load becomes warm. This helps prevent greasy-looking softener stains.
• and remove any used softener sheets from the dryer to prevent greasy-looking softener stains.
Check the Moisture Monitor...
MOISTURE MONITOR
Indicator lights in the moisture monitor will display
when an IntelliDry cycle is in operation. The top light
will blink on and off. As loads dry, there will be longer
pauses between each blink. No lights will display during NOTE: The top monitor
Time Dry or during the Dryel Fabric Care cycle, MORE light may not blink when
small loads of heavy, bulky
The bottom light in the monitor will remain on until the items are dried, such as large
cool down portion of the cycle starts. During cool down LESS rugs or sweaters.
the dryer continues to tumble the load in unheated air to
help minimize wrinkling.
4