Filter
Top Products
13
dding detergent
A
• The detergent should be used according to the
instruction of the detergent manufacture.
• If too much detergent is used, too many suds can
occur and this will decrease the washing result
or cause heavy load to the motor. (Causing
malfunctions)
• If there are too many suds, the detergent quantity
must be reduced.
• Use specified Front loader washing powder
only.
• Detergent usage may need to be adjusted
for water temperature, water hardness, size
and soil level of the load. For best results,
avoid oversudsing.
• Detergent is flushed from the dispenser at
the beginning of the cycle.
4. Water softener
• A water softener, such as Anti limescale
(Calgon) can be used to cut down on the
use of detergent in extremely hard water
areas. Dispense according to the amount
specified on the packaging.
First add detergent and then the water
softener.
• Use the quantity of detergent as for soft
water.
[Important Note]
Recommended amount of detergent as per
wash load
Water quality and temperature will play a
major part on how much detergent is
required. Follow the detergent manufacturer's
recommendation as a guide, however, Less
detergent can often be used.
Never use more than the Detergent
manufacturer’s recommendation.
(Too much soap, or over sudsing may cause
the unit to operate abnormally.)
Always use Detergent designed for Front
Load Washing machines only.
When tested in accordance with standard
AS/NZS 2040.2, the water rating that has
been applied to this model was the result of
using 70% of the detergent with the cycle
programmed on the Cotton 40°C, Intensive.
* For best washing results, we recommend to
mix dry detergent with warm water.
1) Open the door and place Tablets into
the drum.
3. Detergent dosage
5. Using Tablets
MAX
max
2) Load the laundry into the drum.
3) Close the door and set the desired
program cycle to commence.