Kenmore 110.4597 Washer User Manual


 
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
The parts supplied are in the washer drum.
Tools needed for connecting the water inlet hoses
Pliers (that open to 19/16"[39.5 mm])
Flashlight (optional)
Tools needed for installation
Open end wrench 17 mm and 13 mm
Level
Wood block
Ruler or measuring tape
Parts supplied
Pedestal
You have the option of purchasing a pedestal for this washer. This
will add to the total height of your washer.
Beadedstrap Transport bolt hole plug (4)
Alternate Parts
Parts listed are available from your local Sears store or Sears
Service Center. For further information, please call
1-800-4-MY-HOME ®(1-800-469-4663}.
If You Have You Will Need to Buy
Laundry tub or Sump pump system (if not already
standpipe taller available)
than 96" (2.4 m)
Overhead sewer Standard 20 gal. (76 L), 30" (76.2 cm)
tall drain tub or utility sink and sump
pump (available from local plumbing
suppliers)
Floor drain Siphon break, Part Number 285834;
additional drain hose Part
Number 8318155; and connector kit,
Part Number 285835
Drain hose too 4 ft (1.2 m) drain hose extension kit, Part
short Number 285863
Water faucets 2 longer water fill hoses:
beyond reach of 6 ft (1.8 m) Part Number 76314,
fill hoses 10 ft (3.0 m) Part Number 350008
Optional Pedestal
This pedestal (with storage drawer) is available in three colors.
To order, call your local Sears store. For further information,
please call1-800-4-MY-HOM E®(1-800-469-4663). i! i
Pedestal Approximate Color Part
Height height with Number
washer
13" (33 cm) 51" (130 cm) White 42842
13" (33 cm) 51" (130 cm) Bisque 42844
13" (33 cm) 51" (130 cm) Graphite 42846
Stack Kit
Are you planning to stack your Kenmore washer and dryer? To do
so, find the stack kit (8541503) in the drum of the matching
Kenmore dryer. Follow instructions included with the kit.