Filter
Top Products
Rinse & Spin
Use this cycle to get a rinse and spin only. This cycle combines
fast-speed tumbling and high-speed spin. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
Rinse & Spin is useful for
• Loads that need rinsing only.
• Adding fabric softener to a load using the fabric softener
dispenser.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your
wash load. The spin speed is preset to high. If desired, you can
reduce the spin speed by selecting the speed you want from the
SPIN SPEED modifier.
NOTE: Loads of synthetics, delicate fabrics, handwashables, and
woolens should be drained with no spin or low spin to avoid
fabric stress.
Prewash
Use this option for loads of heavily soiled garments that need
pretreatment.
• Add detergent to the Main Wash Compartment of the
Dispenser Drawer.
This option adds tumbling time prior to the selected main cycle.
The washer continues automatically from prewash into the main
wash cycle.
Extended Spin
Use this option to add an additional spin to any cycle to improve
drying times for some heavy fabrics or special-care items by
reducing excess water, which may save energy.
End of Cycle Signal
This signal is helpful when you are removing items from the
washer as soon as it stops. Select ON or OFR
As with any new product, you will hear sounds that you are not
accustomed to. You may hear various sounds when the door is
locked and unlocked and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will
be momentary pauses. You will hear water spraying and
splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation. See
"Troubleshooting."
You can customize your wash by adding OPTIONS to your cycle
selections. You can add or change an option after starting a cycle
anytime before the selected option begins. Not all Options are
available with all cycles.
OPTIONS
PREWASH
EXTENDEDSPiN
ENDof CYCLE
SIGNAL
OH I OfF
See the "Laundry Guide" section for an overview of possible
options for each Wash Cycle selection.
You can select more than one option for a cycle. Some
options cannot be added to some cycles.
Ifan option is available with a selected cycle, the light for that
option will glow when selected.
Ifan option is unavailable with a selected cycle, there will be a
short tone, and the light for that option will not glow when
selected.
Preset cycle settings of Wash/Rinse Temp, Spin Speed, and Soil
Level can be changed. You can change a modifier after starting a
cycle anytime before the selected modifier begins. Not all
Modifiers are available with all options and cycles.
MODIFIERS
RUT!9 TtMP COMR0!
o EXTRA HOTI COLD • NIGH
O HOT /COLD O _4EOtUM
• WARM/WARM o LOW
® WAffM /COLD o EXTRA LOW
• COLD /COLD @ NO SPIN
WATER TEMP SPIN SPEED
WASfl i RI_S
\. /
RINSE
OPTIONS
To change the water temperature, select the WATER TEMP
button until the desired setting glows.
To change the spin speed, select the SPIN SPEED button
until the desired setting glows.
• HEAVY
• NORMAL
• LIGHT
SOIL LEVEL
• To change cycle time, select SOIL LEVEL button.
2nd Rinse
A second rinse can be used to aid in the removal of detergent or
bleach residue from garments. This option provides an additional
rinse with the same water temperature as the first rinse. This is
the default rinse setting for the Whitest Whites cycle.
Normal Rinse
Consists of a two phase rinsing process that is effective for
everyday laundry.
16