Kalorik USK DA 31067 Iron User Manual


 
5 DA31066 / 31067 - 091112
Assembly page 5/16
CAUTION BEFORE FIRST USE
The iron has been greased, and as a result, the iron may slightly
smoke when switched on for the first time. After a short while, this
will cease.
Before using for the first time, remove any sticker or protective foil
from the soleplate. Clean the soleplate with a soft cloth.
Keep the soleplate smooth: avoid hard contact with metal
objects (such as clothes rack, button and slide fastener).
FILLING THE WATER TANK
Use preferably demineralized water.
Make sure the iron is unplugged from the outlet
Turn the temperature dial to "MIN" and the variable steam dial to
the "0" setting.
To fill the water tank, open the lid of the filling opening and pour
water through the fill opening, the iron put at an angle of 45°,
using the beaker. Never exceed the MAX mark indicated in on
the appliance.
When ironing, unplug the appliance before refilling. Fill the water
tank by holding the appliance in 45° angle position without
putting down the hot soleplate, unless you have a heat-resistant
base.
TEMPERATURE SETTINGS
You can choose the temperature setting in function of the
material of cloth to iron.
In order to turn the iron to the desired temperature, please turn the
temperature knob clockwise into the required position (see table
below). If you have a doubt, take a look at the garment’s label.