JVC LT-26A61SJ Washer/Dryer User Manual


 
20
Remote control buttons and functions
LT-32/26A61BU/SU / LCT1996-001A-U / English
Operating a JVC brand VCR or
DVD player
These buttons will operate a JVC brand VCR
or DVD player. Pressing a button that looks
the same as the device’s original remote
control button has the same effect as the
original remote control.
1 Set the VCR/TV/DVD Switch to the
VCR or DVD position
VCR:
When you are operating the VCR, set the
switch to the VCR position.
You can turn the VCR on or off with
the # (standby) button.
DVD:
When you are operating the DVD player,
set the switch to the DVD position.
You can turn the DVD player on or off
with the # (standby) button.
You can also press the H or
T button and display the
DVD disc menu screen, and then
operate by pressing the 7
buttons.
2 Press the VCR/DVD Control Button
to control your VCR or DVD player
If your device is not made by JVC,
these buttons will not work.
Even if your device is made by JVC,
some of these buttons may not work,
depending on the device you are using.
You can use the p buttons to choose
a TV channel the VCR will receive, or
choose the chapter the DVD player
plays back.
Some models of DVD player use the
p buttons for both operating the fast
forward/backward functions and for
choosing the chapter. In this case, the
253 buttons do not work.
You cannot turn the TV on or off when the
VCR/TV/DVD switch is set to the VCR or
DVD position.
When you turn the TV on or off, set the
VCR/TV/DVD switch to the TV position.
LT-32&26A61BUSU_Eng.book Page 20 Tuesday, October 11, 2005 6:07 PM