Haier XPB72-0713S Washer User Manual


 
Haier Appliances (India)P. Limited
B-1/ A-14, Mohan Co-operative Industrial Estate, Mathura Road, New Delhi-110044.
Tel: 011-30674000/5000. Fax: 011-26971562. Email: info@haierindia.com Website: www.haierindia.com
To do spinning and draining
or rinsing with water-filling
together, please first do
spinning for around 1 minute,
then do draining or rinsing
with water-filling. Otherwise
the spinning will stop owing
to too much water stored in
the spin tub.
10
Rinse with water-filling
1. Put the laundries into the wash tub. Select suitable wash speed
according to the laundries.
2. Adjust the water level
Set the water level with water level adjusting lever according
to the laundries quantity. Then fill suitable water continuously.
3. Rinse
Adjust the wash timer to 5-7 minutes to do rinsing.
(Repeat the midway spinning and rinsing with stored water for 2-3
times)
Rinse with stored water
1. Put the laundries into the wash tub. Select suitable wash speed
according to the laundries.
2. Fill water to preset water level.
3. Rinse
Adjust the wash timer to 2-3 minutes to do rinsing.
When the laundries quantity is a few, please use "Standard"
wash speed. If you use "Strong" wash speed, it may splash.
Rinsing
Semi Automatic Washing Machine
User's manual
This manual is for
XPB72-0713S
XPB72-0714D
XPB72-0715S
Please read this manual
carefully before using.
Retain it for future reference.
Customer Name ...................................................................................
Address ..................................................................................
Serial No.................................................................
Dealer Seal ................................................................................................................................................................................
Date of purchase...............................................
Model No......................
Customer Name ...................................................................................
Address ..................................................................................
Serial No.................................................................
Dealer Seal ................................................................................................................................................................................
Date of purchase...............................................
Model No......................
H A I E R WA R R A N T Y
HAIER APPLIANCES (INDIA) PVT. LTD. ( hereinafter referred to as "the Company")
hereby offers the following warranty to the original domestic purchaser commencing
from the date of the purchase. The Company, at its sole discretion, will free of charge
repair or replace any defective part or parts which prove to be defective in
workmanship and/or materials and not due to abnormal or improper usage.
CONDITIONS OF WARRANTY
1) This warranty will automatically
terminate on the expiry of the
warranty period from the date of
delivery.
2) The Company is not liable for any
delay in servicing due to reasons
beyond the control of the
Company or any of its authorised
service centres.
3) Parts replaced or repaired under
this warranty are warranted
throughout the remaining of the
original warranty period.
4) It is entirely lelf to the Company's
discretion to repair/replace parts at
the site of installation or at the
authorised service centre of the
Company.
5) This warranty shall be strictly
limited to the repairs or replacement of defective parts specified in the warranty. This warranty shall not cover any
consequential or resulting liability.
6) This warranty shall not, in any case, extend towards payment of any monetary consideration whatsoever or
replacement or return of the product.
7) The Company may repair/supply parts free of cost during the warranty period. This warranty does not cover any
Excise duty. Central or Sales tax, Octroi and other local taxes or levies on the components/parts.
8) The parts shall be replaced by functionally operating equivalent material only and not with brand new ones and are
likely to be different from the one originally fitted. The parts thus removed shall be taken back by the company.
9) The Company reserves th right to retain any part or component replaced at its sole discretion during the warranty
period.
10) In no event the Company or its authorised service centre be liable for any consequential damages or resulting
liability, damage or loss arising directly or indirectly out of any defect in the product.
11) This warranty is not valid in case of the following events:
a) If the product has been installed/serviced/repaired/opened or tampered by any unauthorised personnel.
b) If defects arise/caused by accidents, alteration, misuse, neglect, sunstitution of original components with
spurious/non-genuine components, attacked by household pest/rodents, fire flood, earthquake, lightning
and/or any other act of God/natural calamities.
c) The product is shifted outside India.
12) For any service under this warranty beyond city/town/municipal limits from the Company /authorised service centre,
a fixed charge of Rs. 50 will ne collected from the customer in addition to the actual to and fro charges by the shortest
route.
13) Any change of location or change in the ownership during the warranty period must be intimated in writing to the
Company.
14) The Company's employees or its authorised representatives have no authority to vary the terms of this warranty.
15) This warranty is effected in New Delhi and claims, if any, shall be made only before the courts having jurisidiction in
New Delhi and no claim shall be made against the Company outside New Delhi notwithstanding that the Appliance
may have been sold or delivered elsewhere.
Product
Colour TV
Refrigerator
Washing Machine
Airconditioner
Microwave
Dishwasher
Cloth Dryer
DVD
Warranty
Period
Parts not covered
Remote, Cabinet
Plastic, Glassware,
Light bulb
Top Lid, Outer
Casing
Air Filter, Front Gril
Glass, Plate, Bulb
12 Months
Comprehensive: 12 Months
Comprehensive: 12 Months
12 Months
Comprehensive: 24 Months
Compressor: 60 Months
Compressor: 60 Months
Motor: 60 Months
24Months
12 Months
12 Months
Inspired Living
Inspired Living
HAIER APPLIANCES (INDIA) PVT. LTD., B-1/A-14, Mohan Co-operative Industrial Estate, New Delhi-44
Ph. 30674000/5000, Fax: 011-26971562
13
1. Take off the corrugation pipe.
Dismantle the upper part of the
corrugation pipe inside
the overflow filter (as
indicated in Figure1)
2. Cleaning the overflow
filter.
Clean the lint around the
filter and flush with tap
water.
3. Install the overflow filter.
(a) Install the corrugation pipe.
(b) Insert the mounting plate at the
bottom of the filter into the
valve cover.
(c) Hang up the book at the left
upper side.
(d) Push the upper part in as
indicated in Figure 2.
Cleaning the overflow filter
Water level
adjusting lever
Corrugation
pipe
Figure 1
Hook
Figure 2
Alcohol
Petrol
Thinner
Disposal of the complete unit
Wipe the complete unit with soft
cloth twisted dry.
Wipe with neutral detergent if too
dirty.
Do not wash it directly by water.
After washing, dismount the water
inlet hose.
Do not store water in the tub for
long period. Discharge the water
immediately after each using.
Pull off the power plug and hang up
the power cord.
Hang up the drain hose.
Wipe off the water drops on the
surface and inside the tub with
clean soft cloth.
Open the cover of the wash tub and
the inner/outer cover of the spin
tub for some time (about one hour),
then close them.
16
Packing list
Specification
Water level /Water quantity (L) (about)
Washing / Spinning capacity (kg)
Dimensions (mm)
Maximum/58 Medium/49 Minimum/43
Injection pressure (MPa)
7.2 / 6.0
L 786 W 455 H 945
0.02 0.2
Name Quantity
One piece
One piece
One piece
One piece
One piece
One set
User's manual
Warranty manual
Water inlet hose
Lint filter
Gland
Twin-tub washing machine
12
Disposal after washing
After using, please clean the lint and foreign materials of the lint filter
and over flow filter in time. Otherwise it may influence your using the
machine.
Please first pull off the power plug from the receptacle before
cleaning.
The lint filter must be used during washing.
It must be cleaned in time after each using.
1. Take off the lint filter
Put hand at the indicated position.
Push down to take it off.(See to Figure 1)
2. Clean the lint
Put it in water and clean while it is
still wet. (See to Figure 2)
3. Install the lint filter
After cleaning , insert the
bottom of the lint filter (marked
with "down side ") into the overflow filter.
then push the upper part of the filter in
(marked with "up side"). (See to Figure 3)
Too much lint on the overflow filter will
influence the normal usage of the machine.
Please clean it every two months.
Take off the overflow filter.
As indicated in the figure, nip the elastic fixing
claw and pull it to the direction of the arrow to
take it off.
Figure 1
Figure 3
Figure 2
Elastic fixing
claw
Cleaning the overflow filter
Cleaning the lint filter
15
Trouble-shooting Answer to question
(If there's breakdown, please pull off the power plug before
checking) The following phenomena are not breakdowns sometimes.
Please confirm again before sending it to repair. If there are real
breakdowns, Please come to the special maintenance department or
after-sale service department of our company. Do not repair it by
yourself.
The machine does
not act.
Is there power failure?
materials?
Is the power plug loose?
Is the pulsator twisted by foreign
The draining does
not work.
There's abnormal
sound during
washing
Are there hair pin, coins or metal items
brought inside the tub?
Is the drain hose put down?
Is the drain hose frozen?
Is the drain hose blocked by foreign
material?
Are there laundries falling to the outer side
of the spin tub?
There's abnormal
sound and violent
vibration during
spinning.
Is the machine slanting?
Is the gland pressed evenly?
Are there laundries falling to the outer side
of the spin tub?
Are the laundries in spin tub too much?
There may be some
water flowing out of
the drain hose in
the first use of the
machine.
It is the water remained in the factory
inspection of performance.
Phenomena The reason
14
Trouble-shooting Answer to question
If the laundries fall to the outer side of the spin tub, please take
them out immediately.
Prevent the freezing(be sure to discharge the water
completely after using)
After complete draining, set the " WASH SELECTOR" at
"STRONG" or "STANDARD". If it is set at "DRAIN", it will be
rather difficult for the frozen water to melt.
When the water is frozen
Pour hot water below 50°C into the wash tub to soak it
completely. Then turn the pulsator with hands gently. Please
confirm the drainage can work normally before next using.
°
Below 50 c
2-3L
If the laundries fall to the outer side of the spin tub
When the remained water is frozen
11
1. Put the laundries into the spin tub evenly and smoothly.
2. Press the gland in the tub properly. Close the inner and outer
cover of the spin tub.
3. Spin
Select suitable spin time according to the laundries, and do
spinning.
During spinning, if there's abnormal sound, it is generally
owing to slanting placement of the laundries. Please stop the
machine and re-order the laundries.
In spinning, it will pause the work if you open the outer cover of
the spin tub. Close it to resume the spinning.
Spinning
Gripper - Haier Manua Revised (correction) - date - 31 - 5 -2010