Filter
Top Products
The information contained in this document is only a recommendation for an automatic lubrication system and is not intended to
replace the installation and maintenance instructions provided by the original equipment manufacturer.
Mobile Lubrication Library
Telehandler Loadall
Suggested automated lubrication system layout for Telehandler
Loadall
Kit No.: 24R378, G3, USP, 21PT
Maximum System Working Pressure: 3000 psi (206 bar, 20.7 MPa)
Important Safety Information
Read all warnings and instructions in all
related manuals. Save all instructions.
Related Manuals
Manual No. Manual Title
3A0414 G3 Pump
3A0525 Pressure Relief Valve
3A0528 Remote Manual Run
3A0860 USP Valves
Fluid leaks from incorrectly installed or ruptured compo-
nents, and/or failure to verify the components are prop-
erly installed and tested, can result in serious injury such
as fluid spraying in the eyes or on skin and fluid injection,
or equipment damage.
To prevent injury or equipment damage, installation must
be done by a professional and tested prior to use. Con-
sult Parker literature for specific hose assembly instruc-
tions. These instructions are available from your Parker
representative or at www.Parker.com/pdf.
333504B