GE DSXH43EVWW Clothes Dryer User Manual


 
DSXH43GVWW—GE 6.0 Cu. Ft. Capacity Spacemaker
®
Gas Dryer
GE Appliances
Specification Revised 6/00
Dryer Dimensions (in inches)
Dryer Installation Options
Exhaust Options:
Gas—3-way via rear, right and bottom. Dryer is shipped exhausted to the rear. Alternate
exhausting knockouts are supplied.
Gas Dryer Electric Rating: 120V, 60Hz, 6A
An individual properly-grounded branch circuit, with a three-prong grounding-type receptacle,
protected by a 15 or 20 amp circuit breaker or a time-delay fuse is required.
Gas (BTU/HR): 22,000. Factory-equipped for natural gas. Tested for LP gas. LP gas supply
requires a conversion kit. Check installation instructions for correct kit and have a qualified
gas technician install a conversion kit. See dryer ducting information for proper installation.
Note: Dryer wall outlet must be located within 36" of service cord entry and accessible
when dryer is mounted in position.
Installation Information: For complete information, see installation instructions packed
with your dryer.
REAR VIEW
26-7/8
3-3/4
1
36
Under
Counter
34-5/8"
3/16"
Gas Pipe Connection
Electric
Connection
2-9/16
13-9/16
SIDE VIEW
25-3/4
47-1/2
4-3/4
Optional
Vent Knockout
Door Open
90°
4-3/8
3/4
27" Min.
27" Min.
70-5/8
Note:
27"
Min.
34-5/8"
Min.
Custom Sized
Countertop Required
54" Min.
27
Min
.
Note:
Closet Installation Requires Additional
Minimum Clearances:
A Minimum of 120 Square Inches of Openi
n
Equally Divided at the Top and Bottom of
the Closet Door is Required.
Top of Dryer to Ceiling 15"
Back of Dryer to Wall 4"
Front of Dryer/Washer 1"
to Closet Door
R
Listed by
Underwriters
Laboratories
For answers to your Monogram,
®
GE Profile Performance Series,
GE Profile
or GE appliance questions, call
GE Answer Center
®
service, 800.626.2000.
Stacked in Cabinet Installation Undercounter Installation