Filter
Top Products
PROFESSIONAL LAUNDRY
W475S W485S W4105S
8/18 9/20 11/25
75 85 105
520 520 595
830 830 776
200 200 200
5.2 / 7.4 5.2 / 7.4 5.2 / 7.4 / 9.6
x x x
x x x
46 ** 46 ** 47 **
54+14 54+14 55+15 55+15 72+20 72+20
0.15/0.35 0.15 0.15/0.35 0.15 0.15/0.5 0.15
- 0.5 - 0.5 - 0.7
Washer extractors
W475S, W485S, W4105S
Main options
• Stainless steel front panel
• Stainless steel side panel
• Drain pump
* Water temperature 15°C cold water and 65°C hot water
** Depending on steam pressure
Certified in accordance with ISO 9001 and ISO 14001 and approved IP 24D.
Features and benefits
• Clarus Control
®
with:
– Fully programmable microprocessor
– All relevant wash parameters can be programmed
– Programming from key pad or downloading via memory card
• AS – Automatic Savings:
– The machine weighs the linen and adjusts the amount of water
and energy according to the load. This leads to considerable
savings in case the machine is not fully loaded
• Frequency-controlled motor with fixed wash and extraction speeds
ensures smooth action in the wash and extraction sequence
• Good dewatering ability due to higher G-force compared with a
traditional solid mount machine
• Solid mount construction with robust frame in galvanized steel
• Extremely low water and energy consumption – see table below
• Four compartment soap box for manual dosing of powder or liquid
detergent
• Large door opening for easy loading/unloading
• Stainless and galvanized steel in all vital parts for high degree of rust
protection
• SuperBalance
TM
guarantees the correct extraction force
Main specifications
Max. capacity kg/lb
Drum, volume litre
diameter ø mm
Extraction rpm
G-factor
Heating alternatives, 230/400V electricity kW
steam
non-heated
Consumption data ”Normal 60°C” * (3G01)
Total time min
Water consumption (cold+hot) litre
Energy consumption (motor/heating) kWh
Steam consumption kg
El Steam El Steam El Steam
Images shown are a representation of the product only and
variations may occur.